When applying coatings, paint brushes can shed filling material onto the coated surface. A new ASTM International standard describes a procedure for testing the shedding properties of both natural bristle and synthetic filament paint brushes.
ASTM D7834, Test Method for Filling Material Shedding of Paint Brushes, has been developed by Subcommittee D01.61 on Paint Application Tools, part of ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications. The test described in D7834 determines the ability of a paintbrush to resist shedding during paint application.
“This is not the only metric to evaluate paint brush quality, but it is a piece to help minimize human bias,” says Gary DeCarr, leader and research and development engineer, Newell Rubbermaid, and a D01 member. “It is an industry-accepted standardized test using a dimensionally defined comb repeatedly combed through the filaments of a brush. Observing any filaments that pulled, or fall out of the brush head, helps project the quality and durability of the brush.”
DeCarr says that the standard will be useful to paint brush manufacturers and retailers as well as paint brush quality control departments and paint applicator engineers.
To purchase ASTM standards, visit www.astm.org and search by the standard designation, or contact ASTM Customer Relations (phone: 877-909-ASTM; sales@astm.org). ASTM International welcomes participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/JOIN.
For more news in this sector, visit www.astm.org/sn-consumer or follow us on Twitter @ASTMProductsRec.
ASTM Committee D01 Next Meeting: June 23-24, 2013, June Committee Week, Jacksonville, Fla.
Technical Contact: Gary DeCarr, Newell Rubbermaid, Huntersville, N.C., Phone: 704-987-4462; gary.decarr@shurline.com
ASTM Staff Contact: Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org
ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org
Release #9288
January 24, 2013
